Technical

Rhodium plating for jewellery: the process step by step and what you need

Rhodium plating deposits a very thin layer of bright white rhodium on jewellery by electroplating. Most bad results come from poor cleaning, not the plating: polish, clean, degrease, activate and rinse before plating, and follow your rhodium solution's data sheet for voltage and time. Silver usually needs a barrier layer first.

Ask us about rhodium plating machines
A Semsons Tech rhodium plating machine with three baths and control panel on a workbench, with gloves and safety glasses beside it
Clean metal, steady current and careful rinsing give a bright, even rhodium finish.
On this page 8 sections
  1. What rhodium plating is
  2. Why jewellers use it
  3. The plating process, step by step
  4. Settings: follow your solution's data sheet
  5. Common problems
  6. Safety
  7. Rhodium plating machines from Semsons Tech
  8. Where to see and buy it

Rhodium plating gives white gold and silver jewellery a bright, white, mirror-like finish. It is one of the most common finishing jobs in a jewellery workshop, and one of the easiest to get wrong. Most bad results come from poor cleaning, not from the plating itself. This guide explains the process and what you need.

What rhodium plating is

Rhodium is a white precious metal. In plating, a very thin layer of it is deposited on the jewellery using electricity. The piece is connected to the negative side, a special anode to the positive side, and both sit in a rhodium solution. A small current carries the rhodium onto the piece.

Why jewellers use it

  • White gold looks bright white instead of slightly yellow or grey.
  • Silver gets a brilliant finish and resists tarnish.
  • Old white gold jewellery can be refreshed when the original plating wears.

The plating process, step by step

  1. Polish the piece to a high shine. Plating shows every scratch.
  2. Clean it thoroughly, for example in an ultrasonic cleaner, then rinse.
  3. Electroclean (degrease) to remove the last traces of grease, then rinse.
  4. Activate the surface with a short acid dip, then rinse.
  5. For silver: add a barrier layer such as palladium first.
  6. Rhodium plate for a short time, moving the piece gently to stop bubbles sticking.
  7. Rinse and dry.

Rinse with clean distilled water between every step. Any chemical carried from one bath to the next spoils the result.

Settings: follow your solution's data sheet

Voltage, temperature and time depend on the rhodium solution you use. Published guides give different numbers, so do not copy settings from another workshop. Use the figures on your solution's data sheet, keep the voltage steady during plating, and make sure the anode never touches the piece.

Common problems

  • Dark or black plating: the piece was not clean, or the current was too high.
  • Dark spots: air bubbles stuck to the piece. Move it gently during plating.
  • Patchy or peeling plating: poor cleaning or a contaminated bath.
  • Uneven results from day to day: loose connections, or temperature that is not controlled.

Safety

Plating solutions are chemicals. Wear safety glasses, gloves and an apron, and work with good ventilation to clear the fumes.

Rhodium plating machines from Semsons Tech

We supply rhodium plating machines for jewellery workshops, along with ultrasonic cleaners for the cleaning steps. When choosing a plating machine, check:

  • a steady, adjustable power supply with a clear display;
  • enough baths for cleaning, activation, rinsing and plating;
  • temperature control for the baths that need heat;
  • the right size for the jewellery you plate.
A white rhodium plating machine with three baths and a control panel, on a plain background
A multi-bath rhodium plating machine: cleaning, activation and plating in one unit.

Where to see and buy it

These are the Semsons Tech machines for this job. The store links let you book online; the other links open the full specifications or a quotation request.

Semsons Tech machines for this job, where to buy them and their key facts
Machine and where to buyKey facts
Rhodium plating machine
Ask for a quote
Multi-bath plating unit with power and temperature controls
Ask for the current model and datasheet
Digital ultrasonic jewellery cleaner
Buy or book on our store
For the cleaning step before plating

See the full plating process before you buy. Book a demonstration or call +91 98216 12340.

Answers

Related questions

Didn't find your answer? Our team replies within one working day.

Ask a question
What is rhodium plating?

It is a very thin layer of rhodium, a bright white precious metal, applied to jewellery by electroplating. It gives white gold and silver a brilliant white finish.

Why is white gold rhodium plated?

White gold is naturally slightly yellowish or grey. Rhodium plating gives it the bright white colour customers expect.

Can silver be rhodium plated?

Yes. Silver usually gets a barrier layer, such as palladium, before the rhodium, so the rhodium bonds well.

Why does rhodium plating turn dark or patchy?

Usually because the piece was not perfectly clean, air bubbles stuck to it, or the current was too high. Cleaning is the most important step.

What voltage should I use for rhodium plating?

Follow the data sheet of your rhodium solution. Published guides give different figures, because solutions differ.

Keep reading

Related guides

Technical · 4 min read

How to test gold coins and bars without damaging them

Test gold coins and bars with two non-destructive checks. An XRF analyzer reads the gold percentage at the surface, and a conductivity tester looks below it. Tungsten conducts at about 18.8 MS/m, which matches neither fine gold (about 45) nor 22K coin gold (about 9.7), so a hidden tungsten core reads off target.

Technical · 5 min read

Porosity in jewellery casting: gas or shrinkage, what causes it and how to fix it

Porosity has two main kinds. Shrinkage leaves tiny pinholes in thick sections and is fixed with the sprue size and position. Gas porosity leaves bubbles and is fixed with cleaner metal, dry crucibles, a complete burnout and casting under vacuum. If the holes appear in the same place on every tree, check the sprue first.

Technical · 4 min read

Burnout furnace for jewellery casting: the burnout cycle and how to choose a furnace

A burnout furnace heats the invested flask to remove the wax and leave a clean mould, then holds it at the casting temperature. Many gypsum investments for gold and silver peak at around 730 °C after a slow start, but always follow your investment maker's chart. Heating too fast in the first hour causes rough castings.

Want to know more?

Tell us what you need and our team will call or WhatsApp you.

Polishing & Finishing Equipment

What do you need? (optional)

Your details will be used only to respond to your enquiry. Privacy policy

Prefer to share more detail? Use the full enquiry form