200 W floor cabinet
Jewellery Spot Welding Machine
Pulsed YAG welder with a 10× microscope, CCD camera and a chiller built into the cabinet, on castors.
- Output power
- 200 W
- Viewing system
- 10x Microscope & CCD System
Jewellery laser welding & soldering
A jewellery laser welding machine — what many workshops call a laser soldering machine — joins, repairs and builds up gold, silver and platinum with short pulses of laser light instead of a flame. The heat stays at the joint, so ring sizing, prong re-tipping and chain repair can often be done close to set stones. Semsons Tech has received a Best Laser Welding Machine award for this range.
Awarded Best Laser Welding Machine — JMAIIE Excellence Awards Night, 2024
The range
Many workshops in India call the same machine a laser soldering machine or a gold soldering machine. Strictly it welds: the pulse melts the metal itself and no solder is added, which is why the joint can sit close to stones and finished surfaces. Our catalogue also shows a newer desktop model with a binocular microscope and touch screen for smaller benches; its specifications are confirmed with your quotation.
The headline platform is our jewellery spot welding machine, built around a YAG single-doped laser source. Its catalogue-stated feature set is aimed squarely at production repair and fabrication: sweet spot, speed mode, pulse ramping, dual display, micro weld, user-friendly control, and an in-built chiller so the machine holds its duty cycle through a full shift.
200 W floor cabinet
Pulsed YAG welder with a 10× microscope, CCD camera and a chiller built into the cabinet, on castors.
Photograph on request
Compact cabinet
A compact cabinet welder shown beside the 200 W machine in our catalogue. Its parameters are confirmed in writing with your quotation.
By job
Repair and production work where a torch would heat too much of the piece.
| Job | What the laser does |
|---|---|
| Ring sizing | Closes the shank after sizing, often with the stones left in the head. |
| Worn or broken prongs | Builds the prong tip back up in place. |
| Chain and clasp repair | Joins a link or jump ring without heating the rest of the chain. |
| Porosity in castings | Fills the pinhole with metal, ready to be finished flush. |
| Worn or thin sections | Adds metal with filler wire where a piece has worn thin. |
| Tacking parts together | Holds two parts in position before soldering or finishing. |
Not sure it suits your work?
Tell us the repairs and metals you handle, and we will tell you plainly whether a laser welder pays for itself on your bench.
Technical parameters
| Laser source | YAG Single-Doped Laser |
|---|---|
| Frequency of laser | 0.1–20 Hz |
| Wavelength | 1064 nm |
| Output power | 200 W |
| Single pulse energy | 150 J |
| Pulse width | 0.1–20 ms |
| Focal spot diameter | Adjustable 0.2–3.0 mm |
| Viewing system | 10× Microscope & CCD System |
| Control system | Integrated Visual Operating System |
| Cooling system | Chiller & Wind Cooling System |
Equipment by business For jewellery retailers & gold buyers: the equipment we supply for this kind of business
Before you buy
To weld broken gold for your business you need one of three tools: a torch or hydra flame with solder, a pulse arc welder, or a laser welding machine, which Indian jewellers call a laser soldering machine. The laser is the most precise and costs the most: it melts a spot as small as 0.2 mm under a microscope, so chains, prongs and set rings are repaired without heating the whole piece.
A jewellery laser welding machine repairs many broken chains by melting the chain's own metal at a spot as small as 0.2 mm, so the links beside the joint stay cool and keep their shine. Check whether the chain is solid or hollow first, close the link tightly, weld with short pulses and add filler wire only where there is a gap.
The question is not which process is hotter. It is where the heat goes — and on a finished ring with stones in it, that is the whole decision.
Answers
Written to be useful before you buy, not after.
That is the main reason to own one. The pulse is focused and short — 0.1 to 20 ms at an adjustable focal spot — so heat is delivered locally instead of spreading across the piece the way a torch does. Combined with 10× microscope and CCD viewing you can place a weld precisely where it is needed. Stone type and proximity still matter, so we set the machine up on your actual work during commissioning.
Pulse ramping shapes how power is delivered across the pulse rather than dumping it all at once. In practice it gives cleaner welds with less spatter and less cracking on sensitive alloys — one of the catalogue-listed features alongside sweet spot, speed mode and micro weld.
No. The catalogue specifies a chiller and wind cooling system built into the machine, which is what lets it hold output through a production shift rather than needing to rest.
Yes, in everyday use. "Laser soldering machine" and "gold soldering machine" are what many jewellers call a jewellery laser welder. The machine does not use solder: the laser pulse melts the metal at the joint. Our laser soldering guide compares it with torch soldering and covers prices in India.
Repair and production work where a torch would heat too much of the piece: ring sizing, re-tipping worn prongs, chain and clasp repair, filling porosity in castings, building up worn sections with filler wire, and tacking parts together before finishing.
Gold in yellow, white and rose, silver, platinum and palladium. Silver needs more energy per pulse than gold for the same joint, because it reflects the laser light and carries heat away fast.
Our 200 W jewellery laser welding machine is listed on our online store at ₹6,49,000 including GST, with free delivery and on-site installation and operator training. It is booked with ₹50,000 per machine and the balance is paid on installation. The ST-110J and the desktop welder are quoted in writing.
Our 2026 catalogue shows a newer desktop jewellery welder with a binocular microscope and touch screen, alongside the cabinet models. No parameter table is printed for it, so power, pulse energy and price are confirmed in writing with your quotation.
In our range the jewellery spot welding machine is a laser machine — the "spot" refers to the small, localised weld it produces. That is different from resistance tick welding or hydra welding, which the catalogue lists separately at stage eight of the factory workflow.
Get in touch
Tell us what you are producing and we will recommend the right model — including when the honest answer is that you do not need this machine yet.
Share your production requirement and we will come back within one working day with the right model, a realistic throughput estimate and a quotation.