ST-110J
A further welding variant in the Semsons range, shown in the catalogue alongside the 200 W spot welder.
Jewellery Laser & Spot Welding Machines · Laser Welding
Jewellery Laser Spot Welding Machine — 200 W YAG
Weld, repair and build up precious metal beside set stones — focused pulse energy instead of a flame.
| Laser source | YAG Single-Doped Laser |
|---|---|
| Frequency of laser | 0.1-20 Hz |
| Speed | 1064 nm |
| Output power | 200 W |
| Single pulse energy | 150 J |
Specifications
Jewellery Spot Welding Machine technical parameters
| Laser source | YAG Single-Doped Laser |
|---|---|
| Frequency of laser | 0.1-20 Hz |
| Speed | 1064 nm |
| Output power | 200 W |
| Single pulse energy | 150 J |
| Pulse width | 0.1-20 ms |
| Focal spot diameter | Adjustable 0.2-3.0 nm |
| Viewing system | 10x Microscope & CCD System |
| Control system | Integrated Visual Operating System |
| Cooling system | Chiller & Wind Cooling System |
The focal spot diameter is reproduced above exactly as printed in our catalogue ("0.2-3.0 nm"). We believe this reflects a catalogue typesetting convention rather than the intended engineering unit, and we would rather flag that openly than silently correct our own source. Confirm this parameter against the manufacturer datasheet before procurement.
Core advantages
- Sweet spot
- Speed mode
- Pulse ramping
- Dual display
- Micro weld
- User-friendly control
- In-built chiller
Who this machine is for
Production repair and fabrication where welds must be placed close to set stones and finished surfaces without the heat spread of torch work.
Not sure this is the right model?
Send us your designs and target output. We will tell you honestly whether this machine, a smaller one, or a larger one fits — including when the answer is "you don't need this yet".
Alternatives
Other models in this range
Answers
Jewellery Spot Welding Machine questions
Can this laser welder work near set stones?
That is the main reason to own one. The pulse is focused and short - 0.1 to 20 ms at an adjustable focal spot - so heat is delivered locally instead of spreading across the piece the way a torch does. Combined with 10x microscope and CCD viewing you can place a weld precisely where it is needed. Stone type and proximity still matter, so we set the machine up on your actual work during commissioning.
What is pulse ramping and why does it matter?
Pulse ramping shapes how power is delivered across the pulse rather than dumping it all at once. In practice it gives cleaner welds with less spatter and less cracking on sensitive alloys - one of the catalogue-listed features alongside sweet spot, speed mode and micro weld.
Do I need a separate chiller?
No. The catalogue specifies a chiller and wind cooling system built into the machine, which is what lets it hold output through a production shift rather than needing to rest between welds.
Is laser welding the same as tick or hydra welding?
No. In our range the jewellery spot welding machine is a laser machine - the "spot" refers to the small, localised weld it produces. Tick welding and hydra welding are separate resistance processes, listed separately at stage eight of the factory workflow.
What power supply does the Jewellery Spot Welding Machine need?
Rated power is 200 W. Confirm your incoming supply before you order — voltage and phase are the two things that most often need changing after a machine has already been built.
Does the Jewellery Spot Welding Machine come with installation and training?
Yes. We commission the machine on your floor and train your operators on your own material and your own designs rather than a demonstration sample. Semsons Tech has served the diamond and jewellery industry since 1978, and on our setting machines the control system is self-developed, so support does not depend on a third party abroad.
What is the delivery time, and how are spare parts handled?
We do not publish delivery times, spare-parts pricing or AMC terms, because all three depend on configuration, destination and what is on the floor at the time. They are confirmed in writing on your quotation rather than estimated here. Ask for them explicitly when you enquire and you will get them in writing.
What does the Jewellery Spot Welding Machine cost?
We quote per configuration and destination rather than publishing a list price, because voltage, tooling, spares package and shipping all change the figure. Send us your requirement through the form on this page and you will receive a written quotation.
Quotation
Get pricing for the Jewellery Spot Welding Machine
Tell us your designs, stone sizes and target output. We reply within one working day with the right configuration and a written quotation.
Enquire about the Jewellery Spot Welding Machine
Your enquiry reaches our team tagged to this exact model, so you will not be sent a generic brochure.