Jewellery polishing & finishing

Jewellery Polishing, Cleaning & Finishing Machines

A jewellery polishing machine brings a cast and set piece to its final shine. Bench polishing motors finish one piece at a time; magnetic, vibratory and tumbler machines polish a whole batch to one consistent finish; electro polishing and rhodium plating give the final brightness; and ultrasonic, steam and water-jet machines clean between each step.

A jewellery finishing line, in order

  • Bench polishing Stage 7
    Single and double station polishing motors, flex shafts, lapping
  • Cleaning between stages 3 ways
    Ultrasonic, steam and water jet
  • Bulk final polishing Stage 9
    Magnetic, vibratory and tumbler polishing
  • Brightening and plating Stage 9
    Electro polishing and rhodium plating
  • Metal recovery At the bench
    Filing table with dust collector
Finishing and cleaning machines in the range
15
Finishing stages covered, bench to final shine
5
Bulk polishing methods: magnetic, vibratory, tumbler
3
Ultrasonic tank sizes in our catalogue
2–15 L

The range

The finishing line, machine by machine

Finishing is where margin is won or lost. A piece that is beautifully cast and perfectly set still gets rejected if the finish is inconsistent across the batch — and hand-polishing every piece to the same standard does not scale.

Semsons Tech supplies the full finishing line: bulk finishing by magnetic, vibratory, barrel and tumbler polishing, precision work on single and double station polishing motors and lapping machines, electro polishing, and the cleaning technologies that sit between stages — ultrasonic, steam, water jet and wet or dry sand blasting.

Bench polishing

Hand finishing at stage seven.

  • Single Station Polishing Machine

    Bench polishing motor for hand finishing at stage seven.

  • Double Station Polishing Machine

    Two-position polishing motor for higher bench throughput.

  • Flex Shaft Motors (Foredom)

    Foredom flex shaft motors and control pedals for bench finishing, as listed in our 2026 catalogue.

  • Lapping Machine

    Flat surface finishing.

Bulk polishing

Whole batches to one consistent finish.

  • Magnetic Polishing Machine

    Bulk finishing using magnetic pins — reaches inside detail that bulk media cannot.

  • Vibrator Polishing Machine

    Bulk vibratory finishing for consistent batch results.

  • Tumbler Polishing Machine (opens our online store in a new tab)

    Barrel tumbling for deburring and general bulk finishing. Specifications and price in our online store.

Brightening and plating

The final finish at stage nine.

  • Electro Polishing Machine

    Electrochemical brightening for final finish at stage nine.

  • Rhodium Plating Machine

    Plating for the bright white finish on white gold and silver. Listed in our 2026 catalogue; ask us for the datasheet.

Cleaning

Between every finishing step.

Surface and recovery

Matte finishes, and the gold dust you would otherwise sweep away.

  • Sand Blaster (Wet / Dry)

    Surface preparation and matte finishing; wet and dry variants.

  • Filing Table with Dust Collector

    Captures precious metal dust at the bench — recovery, not just housekeeping.

By job

Which polishing machine for which job

Most finishing problems come from using one method for every job.

Which polishing machine for which job
JobMachineWhy
Polishing inside gallery work and under bezels Magnetic polishing machine Fine magnetic pins reach inside detail that larger media cannot enter.
One consistent finish across a whole batch Vibrator or tumbler polishing machine Bulk vibratory finishing, or barrel tumbling for deburring and general bulk finishing.
Hand finishing at the bench Single or double station polishing machine, flex shaft motor Polishing motors for stage seven; the double station doubles bench throughput.
Brightening without rounding detail Electro polishing machine Brightens electrochemically rather than mechanically.
Bright white finish on white gold and silver Rhodium plating machine Plating for the final white finish; datasheet on request.
Removing polishing compound from recesses Ultrasonic, then steam cleaning Ultrasonic loosens compound in detail; steam blows out what it loosens.
Removing investment after burnout Water jet machine Also used as an auto gypsum cleaner at stage five.
Recovering gold dust at the bench Filing table with dust collector Captures precious-metal dust for recovery and keeps it out of the workshop air.

Planning a finishing line?

Tell us what you make and how many pieces a day, and we will recommend the machines for each stage — and which ones you can skip.

Before you buy

Guides for choosing polishing & finishing

Technical · 4 min read

Rhodium plating for jewellery: the process step by step and what you need

Rhodium plating deposits a very thin layer of bright white rhodium on jewellery by electroplating. Most bad results come from poor cleaning, not the plating: polish, clean, degrease, activate and rinse before plating, and follow your rhodium solution's data sheet for voltage and time. Silver usually needs a barrier layer first.

Answers

Common questions

Written to be useful before you buy, not after.

What is the difference between magnetic and vibratory polishing?

Magnetic polishing uses fine magnetic pins driven by a rotating field. Because the pins are small and highly mobile, they reach into gallery work, under bezels and inside detail that larger media cannot enter — it is a burnishing and cleaning action. Vibratory polishing uses bulk media in a vibrating bowl and is better for general deburring and even surface finishing across a batch. Most production floors run both.

Where does electro polishing fit?

Stage nine — final polishing — alongside magnetic tumbling, vibratory and barrel polishing. It brightens electrochemically rather than mechanically, so it does not round detail the way aggressive mechanical polishing can.

Why do I need a filing table with dust collector?

Because the dust is gold. A dust collector at the filing bench turns what would be swept away into recoverable metal, and keeps precious-metal fines out of the workshop air at the same time.

Do you supply rhodium plating machines?

Yes. A rhodium plating machine is listed in our 2026 catalogue for the bright white finish on white gold and silver jewellery. The catalogue prints no parameter table for it, so tank size, power and price are confirmed in writing with your quotation.

What are the main jewellery polishing techniques?

Bench polishing with a polishing motor or flex shaft for individual pieces; magnetic polishing with fine pins for gallery work and inside detail; vibratory and tumbler (barrel) polishing for whole batches; electro polishing, which brightens electrochemically without rounding detail; and rhodium plating for a white finish. Ultrasonic and steam cleaning remove compound between the steps.

Which polishing machine is best for jewellery?

It depends on the job. For intricate pieces with gallery work, a magnetic polishing machine; for consistent finishes on large batches, a vibratory or tumbler machine; for individual pieces, a single or double station polishing motor. Most workshops end up with a bench motor plus one bulk machine, and an ultrasonic cleaner.

What is the price of a jewellery polishing machine?

It depends on the type and size: a bench polishing motor costs far less than a magnetic or vibratory bulk machine, and ultrasonic cleaners are priced by tank size, from 2 L to 15 L in our catalogue. The tumbler polishing machine and the digital ultrasonic jewellery cleaner are priced on our online store; the rest are quoted in writing.

What cleaning should happen between finishing stages?

Ultrasonic cleaning removes polishing compound from detail and recesses; steam cleaning blows out what ultrasonic loosens; water jet is used after burnout for gypsum removal. Skipping the cleaning steps is the usual reason a final finish looks patchy.

Get in touch

Enquire about Polishing & Finishing Equipment

Tell us what you are producing and we will recommend the right model — including when the honest answer is that you do not need this machine yet.

Enquire about Polishing & Finishing Equipment

Share your production requirement and we will come back within one working day with the right model, a realistic throughput estimate and a quotation.

Required

Add more details Optional — helps us quote faster
  • Reply within one working day
  • Confirmation email with your reference number

Prefer to talk now? Call +91 98216 12340 or message us on WhatsApp.