Service & Support · Mumbai Head Office

Service Engineer

Install, commission and repair our diamond wax setting machines, laser systems and testing equipment at customer factories.

  • Full-time
  • Entry level / 1–2 years experience
  • Kandivali West, Mumbai
  • Apply by

Semsons Tech is hiring a Service Engineer in Kandivali West, Mumbai. Full-time role, based at the Mumbai Head Office, with site visits to customer factories. Open to freshers and candidates with 1–2 years of experience. Apply on this page with your resume.

Job at a glance

Role
Service Engineer
Department
Service & Support
Employment type
Full-time
Location
Kandivali West, Mumbai, Maharashtra 400067 · Based at the Mumbai Head Office, with site visits to customer factories
Experience
Entry level / 1–2 years experience
Education
Diploma or degree in Mechanical, Electrical, Electronics or Mechatronics Engineering
Salary
Not listed on this page. State your expected salary in the note box on the application form.
Posted
Apply by
How to apply
Online form on this page (resume as PDF or Word)

You will be the person a jewellery manufacturer calls when a machine needs to go from crate to production floor, or when a line stops mid-shift. You will work across our full catalogue — diamond wax setting machines, laser marking and welding systems, XRF gold analyzers, 3D printers and casting equipment — learning the mechanical, electrical and software side of each.

What you'll do

  • Install and commission machines at customer sites, including calibration and first-run training for the operator
  • Diagnose and repair mechanical, electrical and control-system faults on-site and, where needed, at our Mumbai workshop
  • Carry out scheduled maintenance visits and keep service records for each customer machine
  • Support customers over phone and WhatsApp for first-line troubleshooting before a site visit is needed
  • Report recurring faults and design feedback to the technical team so they can be fixed at the source
  • Travel to customer factories across Mumbai and, as needed, other cities for installations and service calls

What we're looking for

  • Diploma or degree in Mechanical, Electrical, Electronics or Mechatronics Engineering
  • 1–2 years of hands-on experience with industrial machinery, servo systems or electro-mechanical equipment — fresh, technically strong candidates are welcome to apply
  • Comfortable reading electrical circuit diagrams and mechanical assembly drawings
  • Willing to travel for installations and service visits
  • Clear communicator — you will often be explaining a fix to a factory owner, not another engineer

Why Semsons Tech

Semsons Tech has supplied jewellery manufacturing machinery since 1978 and exports to 34+ countries. You will learn the full stack of machines we build and service — not just one product line.

What the work looks like

Commissioning a machine

A machine arrives crated at a jewellery factory. You uncrate it, connect power and compressed air (the Pro Plus wax setting machine, for example, runs on 220 V AC and 80 psi air), bring up the controller, calibrate it and run the first production sample while the operator watches. Then you train that operator to run it.

A line that has stopped

A customer phones or messages on WhatsApp: the machine has stopped mid-shift. You start with first-line troubleshooting on the call. If it cannot be fixed remotely, you go to the site, or bring the unit into our Mumbai workshop.

Finding the fault

The faults are mechanical, electrical or in the control system. Our setting machines use servo drives, screw guides and a five-axis motion controller; the laser welder pairs a YAG laser source with a chiller and a microscope view; induction melters and laser markers add their own electronics. You work from circuit diagrams and assembly drawings.

Planned maintenance

Visits are scheduled, not only emergency calls, and every customer machine has a service record that you keep up to date.

Closing the loop

When the same fault keeps coming back, you report it to the technical team so it is fixed at the source, not just on site.

Skills you will build

  • Servo drives and multi-axis motion control
  • Laser source, cooling and optics basics (marking and welding machines)
  • Electrical fault-finding from circuit diagrams
  • Mechanical assembly, alignment and calibration
  • Training an operator on the shop floor
  • Keeping service records for each customer machine

What the role offers

  • Hands-on time with every machine family we sell: wax setting, laser marking and welding, XRF gold analysis, 3D printing, casting and melting
  • Work on machines recognised at the JMAIIE Excellence Awards Night 2024 (Best Diamond Setting Machine, Best Laser Welding Machine, Best Laser Cutting Machine)
  • A business that has supplied jewellery machinery since 1978 and ships to 34+ countries

Salary: Not listed on this page. State your expected salary in the note box on the application form.

Is this role right for you?

It suits you if:

  • You like opening a machine up and tracing a fault to its cause
  • You are comfortable travelling to customer factories
  • You can explain a fix in plain words to a factory owner

It may not suit you if:

  • You want a desk-only job: the role includes site visits
  • You want to specialise in one product: the role spans the full catalogue

Get to know us before you apply

What happens after you apply

  1. Fill in the form. Your name, email, phone or WhatsApp number and your resume as a PDF or Word file (.pdf, .doc or .docx) under 5 MB.
  2. Get your reference. Your application and resume go straight to our HR team at [email protected]. You see a reference number on screen and get a confirmation email.
  3. Hear back from us. We review every application and contact you if your profile fits the role.

Questions

Service Engineer job: common questions

What candidates ask before they apply for this role.

Can a fresher apply for the Service Engineer job?

Yes, if you are technically strong. The requirements say fresh candidates are welcome. A diploma or degree in Mechanical, Electrical, Electronics or Mechatronics Engineering is expected.

Where is the Service Engineer based, and how much travel is there?

The role is based at the Mumbai Head Office in Kandivali West. It includes site visits to customer factories across Mumbai and, as needed, other cities for installations and service calls.

Which machines does a Service Engineer work on?

The full catalogue: diamond wax setting machines, laser marking and welding systems, XRF gold analyzers, 3D printers, and casting and melting equipment. You learn the mechanical, electrical and software side of each.

What happens on a first installation visit?

You install and commission the machine, calibrate it, and give the operator first-run training. Scheduled maintenance visits follow, and you keep a service record for that machine.

What is the salary for the Service Engineer job?

We have not published a salary figure on this page. When you apply you can state your expected salary in the note box on the application form.

How do I apply?

Use the application form on this page: name, email, phone or WhatsApp number and your resume as a PDF or Word file under 5 MB. It goes straight to our HR team ([email protected]), and you get a reference number on screen and a confirmation email.

Other openings

More roles at Semsons Tech

See all open roles