Who this machine is for
Drawing jewellery wire from rolled stock down to fine gauges in one operation. The pass count decides how thick a starting wire the machine takes down to 0.05 mm in a single run.
Rolling & Wire Drawing Machines · Wire Drawing
Wire Drawing Machine — SMT 82, SMT 83 and SMT 84
Three multi-pass wire drawing machines - 6, 8 or 12 dies in one run, all drawing down to 0.05 mm.
- Serving the industry since 1978
- Installed and commissioned on your floor
- Written quotation within one working day
SMT 82–84
Rolling & Wire Drawing Machines
- Machine dimensions (cm)
- SMT 82: 110 × 63 × 115 · SMT 83: 130 × 70 × 120 · SMT 84: 150 × 85 × 135
Overview
About the SMT 82–84
Specifications
SMT 82–84 technical parameters
8 parameters, as printed in our catalogue.
- Models
- SMT 82 · SMT 83 · SMT 84
- Model type
- SMT 82: 6 pass · SMT 83: 8 pass · SMT 84: 12 pass
- Max. wire diameter (gauge / mm)
- SMT 82: 18 / 1.2 · SMT 83: 15 / 1.4 · SMT 84: 14 / 2.0
- Min. wire diameter (gauge / mm)
- 47 / 0.05 on all three models
- Motor power
- SMT 82: 2 HP · SMT 83: 3 HP · SMT 84: 3 HP
- Cooling motor
- 0.25 HP on all three models
- Machine dimensions (cm)
- SMT 82: 110 × 63 × 115 · SMT 83: 130 × 70 × 120 · SMT 84: 150 × 85 × 135
- Net weight
- SMT 82: 350 kg · SMT 83: 400 kg · SMT 84: 550 kg
The range
Other rolling & wire drawing models
-
SMT 01–04
Four sizes of double head rolling mill, from a 1 hp single-phase unit at 210 kg to a 5 hp three-phase production mill at 600 kg.
SMT 01: 85 × 34 × 117 · SMT 02: 97 × 42 × 125 · SMT 03: 107 × 51 × 132 · SMT 04: 140 × 55 × 150 Machine dimensions (cm)
Questions
SMT 82–84 questions, answered
Straight answers from the people who install and service these machines. Anything not covered here, ask us on the form below.
What does 6 pass, 8 pass and 12 pass mean on a wire drawing machine?
The number of dies the wire is pulled through in one run, each die a little smaller than the last. More passes take a thicker starting wire further in a single operation: the 6-pass SMT 82 accepts wire up to 1.2 mm, the 8-pass SMT 83 up to 1.4 mm and the 12-pass SMT 84 up to 2.0 mm. All three draw down to 0.05 mm (47 gauge).
Which wire drawing machine should I choose?
Start from the thickest wire you feed. If your rolled stock is 1.2 mm or finer, the SMT 82 covers it at 2 HP and 350 kg. For 1.4 mm the SMT 83; for 2.0 mm the 12-pass SMT 84 at 550 kg. The finished minimum is the same on all three, so the decision is input size and how many reductions you want in one run.
What power do the wire drawing machines need?
A 2 HP main motor on the SMT 82 and 3 HP on the SMT 83 and SMT 84, each with a 0.25 HP cooling motor. The catalogue does not state the supply phase for these models; confirm it in writing before ordering.
How much floor space does the SMT 82–84 need?
It weighs SMT 82: 350 kg · SMT 83: 400 kg · SMT 84: 550 kg. Allow clear working space on the operator side, plus access for any support equipment — compressor, air dryer or water chiller — when planning your layout.
Does the SMT 82–84 come with installation and training?
Yes. We commission the machine on your floor and train your operators on your own material and your own designs rather than a demonstration sample. Semsons Tech has served the diamond and jewellery industry since 1978, and on our setting machines the control system is self-developed, so support does not depend on a third party abroad.
What is the delivery time, and how are spare parts handled?
We do not publish delivery times, spare-parts pricing or AMC terms, because all three depend on configuration, destination and what is on the floor at the time. They are confirmed in writing on your quotation rather than estimated here. Ask for them explicitly when you enquire and you will get them in writing.
What does the SMT 82–84 cost?
We quote per configuration and destination rather than publishing a list price, because voltage, tooling, spares package and shipping all change the figure. Send us your requirement through the form on this page and you will receive a written quotation.
Quotation
Get pricing for the SMT 82–84
Tell us your designs, stone sizes and target output. We reply within one working day with the right configuration and a written quotation.
- 1Send your requirement below
- 2We confirm the right configuration against your samples
- 3You receive a written quotation, per destination
Enquire about the SMT 82–84
Your enquiry reaches our team tagged to this exact model, so you will not be sent a generic brochure.