FOTO 6K
The larger-volume LCD printer - batch printing where build volume per rupee is what matters.
Jewellery 3D Printers & Resins · DLP 3D Printing
S3D-125 — DLP Jewellery 3D Printer
The finest XY resolution we publish - 49 um, for the most detail-critical work on the floor.
| Technology | DLP |
|---|---|
| Build volume | 125 x 70 x 150 mm |
| XY resolution | 49 um (2560 x 1440p) |
| Layer thickness | 10-100 um |
| Production capacity per day | 50 g |
Specifications
S3D-125 technical parameters
| Technology | DLP |
|---|---|
| Build volume | 125 x 70 x 150 mm |
| XY resolution | 49 um (2560 x 1440p) |
| Layer thickness | 10-100 um |
| Production capacity per day | 50 g |
Who this machine is for
Filigree, micro-pave masters and any piece where XY resolution is the binding constraint rather than throughput.
Not sure this is the right model?
Send us your designs and target output. We will tell you honestly whether this machine, a smaller one, or a larger one fits — including when the answer is "you don't need this yet".
Alternatives
Other models in this range
FOCUS 6K
The highest-capacity LCD printer in the range - same build volume as the FOTO 6K, half again the daily output.
S3D-110
The compact DLP - a 10 um minimum layer in the smallest footprint of the S3D series.
S3D-192
DLP at LCD-scale build volume - 289 x 218 mm with a 10 um minimum layer.
WaxJet-510
MJM wax jetting - the highest daily output and the tightest dimensional accuracy in the range.
DC & NC Resin Range
Five resins across two families - one that burns out in the flask, one that never should.
Answers
S3D-125 questions
What resin does the S3D-125 use?
Our DC range is direct-castable - the printed pattern goes straight into investment and burns out like a wax. Our NC range is non-castable, for fit checks, client approvals and masters that will be moulded rather than burned out. Printing an approval model in castable resin wastes money; casting a non-castable pattern ruins the flask. The catalogue lists all models in the range as compatible with both families.
How much can the S3D-125 print in a day?
Catalogue-stated daily production capacity is 50 g. That is a capacity figure, not a promise about your specific geometry - support strategy, plate packing and cure time all move it. We will run one of your own files before you commit if that number is the deciding factor.
Where does 3D printing fit in the factory workflow?
Stage one - designing and moulding, alongside resin and the laser cutting machine. What comes off the printer either goes to vulcanising and moulding at stage two, or straight to investment at stage five if you are casting the printed pattern directly.
Does the S3D-125 come with installation and training?
Yes. We commission the machine on your floor and train your operators on your own material and your own designs rather than a demonstration sample. Semsons Tech has served the diamond and jewellery industry since 1978, and on our setting machines the control system is self-developed, so support does not depend on a third party abroad.
What is the delivery time, and how are spare parts handled?
We do not publish delivery times, spare-parts pricing or AMC terms, because all three depend on configuration, destination and what is on the floor at the time. They are confirmed in writing on your quotation rather than estimated here. Ask for them explicitly when you enquire and you will get them in writing.
What does the S3D-125 cost?
We quote per configuration and destination rather than publishing a list price, because voltage, tooling, spares package and shipping all change the figure. Send us your requirement through the form on this page and you will receive a written quotation.
Quotation
Get pricing for the S3D-125
Tell us your designs, stone sizes and target output. We reply within one working day with the right configuration and a written quotation.
Enquire about the S3D-125
Your enquiry reaches our team tagged to this exact model, so you will not be sent a generic brochure.