Who this machine is for
Floors that want DLP layer control without giving up plate size - the largest build volume in the DLP series.
Jewellery 3D Printers & Resins · DLP 3D Printing
S3D-192 — DLP Jewellery 3D Printer
The largest plate in the DLP series - 192 x 108 mm with a 10 um minimum layer.
Request a quote
Pricing depends on configuration, quantity and your requirements.
- Serving the industry since 1978
- Installed and commissioned on your floor
- Written quotation within one working day
S3D-192
Jewellery 3D Printers & Resins
- Layer thickness
- 10-100 um
- Production capacity per day
- 110 g
Overview
About the S3D-192
Specifications
S3D-192 technical parameters
5 parameters, as printed in our catalogue.
- Technology
- DLP
- Build volume
- 192 x 108 x 150 mm
- XY resolution
- 70 um (2712 x 1528p)
- Layer thickness
- 10-100 um
- Production capacity per day
- 110 g
The range
Other 3d printing & resin models
-
FOTO 6K
The larger-volume LCD printer - batch printing where build volume per rupee is what matters.
25-200 um Layer thickness -
FOCUS 6K
The highest-capacity LCD printer in the range - same build volume as the FOTO 6K, half again the daily output.
20-200 um Layer thickness -
S3D-110
The compact DLP - a 10 um minimum layer in the smallest footprint of the S3D series.
10-100 um Layer thickness -
S3D-125
The finest XY resolution we publish - 49 um, for the most detail-critical work on the floor.
10-100 um Layer thickness -
WaxJet-510
MJM wax jetting - the highest daily output and the tightest dimensional accuracy in the range.
15 um Layer thickness -
DC & NC Resin Range
Five resins across two families - one that burns out in the flask, one that never should.
Questions
S3D-192 questions, answered
Straight answers from the people who install and service these machines. Anything not covered here, ask us on the form below.
What resin does the S3D-192 use?
Our DC range is direct-castable - the printed pattern goes straight into investment and burns out like a wax. Our NC range is non-castable, for fit checks, client approvals and masters that will be moulded rather than burned out. Printing an approval model in castable resin wastes money; casting a non-castable pattern ruins the flask. The catalogue lists all models in the range as compatible with both families.
How much can the S3D-192 print in a day?
Catalogue-stated daily production capacity is 110 g. That is a capacity figure, not a promise about your specific geometry - support strategy, plate packing and cure time all move it. We will run one of your own files before you commit if that number is the deciding factor.
Where does 3D printing fit in the factory workflow?
Stage one - designing and moulding, alongside resin and the laser cutting machine. What comes off the printer either goes to vulcanising and moulding at stage two, or straight to investment at stage five if you are casting the printed pattern directly.
Does the S3D-192 come with installation and training?
Yes. We commission the machine on your floor and train your operators on your own material and your own designs rather than a demonstration sample. Semsons Tech has served the diamond and jewellery industry since 1978, and on our setting machines the control system is self-developed, so support does not depend on a third party abroad.
What is the delivery time, and how are spare parts handled?
We do not publish delivery times, spare-parts pricing or AMC terms, because all three depend on configuration, destination and what is on the floor at the time. They are confirmed in writing on your quotation rather than estimated here. Ask for them explicitly when you enquire and you will get them in writing.
What does the S3D-192 cost?
The S3D-192 is quoted to your configuration, quantity and delivery location. Send us your requirement through the form on this page, or message or call our sales team, and you will receive a written quotation.
Quotation
Request a quote for the S3D-192
Tell us your designs, stone sizes and target output. We reply within one working day with the right configuration and a written quotation.
- 1Send your requirement below
- 2We confirm the right configuration against your samples
- 3You receive a written quotation, per destination
Enquire about the S3D-192
Your enquiry reaches our team tagged to this exact model, so you will not be sent a generic brochure.