Automation

Looking for diamond setting labour? Hire setters, send job work, or set by machine

If you are looking for diamond setting labour, you have three choices: hire and train setters, send the setting out as job work, or set the small round stones in wax on an automatic machine before casting. Hand setting grows only when you add people; a machine adds output without adding setters.

See machines that set stones without more setters Ask our team
Semsons Tech Pro Mini and X4 Pro Plus automatic wax setting machines side by side
Automatic wax setting takes the small, repeated stones off the setting bench.
On this page 10 sections
  1. Where bulk jewellery orders get stuck
  2. What a setter's day actually limits
  3. Looking for diamond setters near you, or someone for jewellery setting ka kam?
  4. Sending stone setting out as job work
  5. Hire, job work or machine: your three options
  6. How much setting work a machine takes on
  7. What changes for your setters
  8. Start small: a second line for the designs that hold you up
  9. Watch it explained in your language
  10. Where to see and buy it

If you are looking for diamond setting labour or more diamond setters, you have three choices: hire and train setters, send the setting out as job work, or set the small round stones in wax on an automatic machine before casting. Hand setting only grows when you add people. A machine adds output without adding setters.

This guide is for owners whose orders wait at the setting bench. It compares the three choices honestly, shows how much of the work a machine can take on, and what happens to the setters you already have.

Semsons Tech X4 Pro Plus double station automatic wax setting machine
A double-station machine keeps setting on one table while the operator loads the other.

Where bulk jewellery orders get stuck

Most stages of jewellery production can be sped up with more machine time: print more waxes, cast a bigger tree, run the polisher longer. Hand setting is different. Every stone is placed by one person, one at a time, so output grows only when you add people.

Diagram of the jewellery production flow, CAD, wax, stone setting, casting and finishing, with hand setting marked as the stage where orders wait, and wax setting by machine moving it before casting
Hand setting is the one stage that only speeds up when you add people.

A design with sixty small stones is sixty separate jobs for a setter. Multiply that by a bulk order and setting becomes the stage everything else waits for. When a setter is on leave or leaves for good, the whole line slows with them.

What a setter's day actually limits

  • Hours, not effort. A good setter can only work so fast before quality drops. Long days late in an order bring loose and tilted stones.
  • Consistency. Two setters set the same design slightly differently. Buyers who order in bulk notice when pieces do not match.
  • Training time. A new setter needs a long time at the bench before you can trust them with fine pavé on gold.
  • Skill in the wrong place. Your best setter spends the day on tiny round stones instead of the centre stones and repairs only they can do.

Looking for diamond setters near you, or someone for jewellery setting ka kam?

Most owners find setters through people they already know: other workshops, trade contacts and setters who bring a colleague. That works, but it is slow, and a good setter who joins from another workshop can leave the same way. Every new setter also needs time on your designs before you can trust them with fine pavé on gold.

So before you hire, look at what the open seat is actually for. If most of the waiting work is small round stones in repeated designs, you are looking for output, not a person, and a machine may give you that output faster than a hire.

Sending stone setting out as job work

Job work is the quickest way to clear a backlog: no hiring, no new equipment. The trade-offs show up later. Delivery dates depend on someone else's queue, quality depends on someone else's setters, and your stones leave the building. For a one-off rush order that can be fine. For steady bulk work it usually becomes the stage you have least control over.

To compare job work, your own setters and a machine on one line, put each into the same cost-per-stone sum. Our guide to diamond setting cost per stone shows how, with your own numbers.

Hire, job work or machine: your three options

Hiring setters, job work or an automatic setting machine: what each gives you and what to watch
OptionWhat it gives youWhat to watch
Hire and train more settersFlexible hands for any kind of workSlow to build, hard to keep, quality varies between people
Send setting out as job workNo new staff, no new equipmentYou lose control of delivery dates and quality, and stones leave your premises
Automate small stones in waxFast, repeatable setting before casting, run by a trained operatorNeeds CAD seats, a compressor and air dryer, and a test run on your designs

Most workshops end up mixing these. Machines take the many small round stones; setters keep the work that needs judgement. If you want the numbers side by side, our guide on manual vs automatic diamond setting compares the two in detail, and increasing production capacity without rebuilding shows where the extra output comes from.

If you need diamond setters right now, our page on using a stone setting machine instead of hiring setters shows the three machines side by side and takes your enquiry.

How much setting work a machine takes on

The machines are rated by stones per hour: up to 10,000 on the Pro Mini, up to 15,000 across both stations on the X4 Pro Plus and up to 20,000 on the ST-HDSSM. Our store sheets say a Pro Mini does the work of about 10 skilled setters and an X4 Pro Plus 10 to 12; our catalogue puts the ST-HDSSM at roughly 15.

Those are rated figures. Your real number depends on your designs, stone sizes and wax quality, so see it run on your own waxes before you plan around it.

What changes for your setters

Automation does not remove the need for people who understand stones. It moves them:

  • Machine operator. Loads the wax models, chooses the design on the touchscreen and swaps stations. Our engineers train operators on site at installation.
  • Stone sorting and checking. Keeps trays filled with the right sizes and checks each set wax before it goes to casting.
  • Bench setting that still needs a hand. Centre stones, larger and heat-sensitive gems, repairs and touch-ups after casting.

Experienced setters are often the best people for all three, because they already know what a good seat looks like.

Start small: a second line for the designs that hold you up

You do not need to change the whole floor at once. Pick the two or three designs that most often make orders late and move them to wax setting first. The Pro Mini suits this well: it sits on a bench, runs on ordinary single-phase power, and its store sheet says an operator learns it in about one hour. Larger factories use it the same way, as a second machine for samples and short runs.

When the volume grows, a double-station machine keeps setting on one table while the operator loads the other. Our guide to choosing a diamond wax setting machine helps you match the machine to your monthly stone count.

Watch it explained in your language

Prefer Hindi, Gujarati or Bengali? Pick your language and WhatsApp opens with your request. Our team replies with a video that explains this machine and how it works.

Where to see and buy it

These are the Semsons Tech automatic wax setting machines. Each link opens the full specifications and a quotation request.

Semsons Tech automatic wax setting machines and their key facts
MachineKey facts
Pro MiniBenchtop single station, 3 nozzles
Up to 10,000 stones an hour, single-phase power
X4 Pro PlusDouble station, 4 nozzles
Up to 15,000 stones an hour
ST-HDSSMDouble station, double head, 8 nozzles
Up to 20,000 stones an hour

Bring the design that holds up your orders and see it set. Book a demonstration at our Mumbai or Rajkot office, at your workshop or live on video, or call +91 98216 12340.

Answers

Related questions

Didn't find your answer? Our team replies within one working day.

Ask a question
Who can do jewellery setting ka kam for my workshop?

Jewellery setting ka kam (stone setting work) is done by skilled setters at the bench, by outside setters as job work, or, for small round stones in repeated designs, by an automatic wax setting machine before casting. A machine sets thousands of stones an hour with one trained operator.

Where can I find diamond setters near me?

Skilled setters are found through jewellery trade contacts, other workshops and setter networks in the big jewellery centres. They are hard to find and keep, so many owners also look at setting the small, repeated stones by machine and keeping their setters for the work only they can do.

Is it better to hire stone setters or buy a setting machine?

It depends on your stones. For many small round stones in repeated designs, an automatic wax setting machine adds output without adding people. For large centre stones, heat-sensitive gems, repairs and one-off pieces you still need a skilled setter. Most workshops use both.

How much does a diamond setter cost?

Setter pay varies by city, skill and whether they are paid per day or per stone, and we do not publish a rate. Work out your own cost per stone from what you pay and what a setter sets in a day; our guide to diamond setting cost per stone shows how.

Can I send stone setting out as job work?

Yes, many workshops send setting to outside setters. It needs no new staff, but you lose control of delivery dates and quality, and your stones leave the premises. Setting small stones in wax in-house keeps both under your roof.

How many setters does an automatic setting machine replace?

Our store sheets put the Pro Mini at the work of about 10 skilled setters and the X4 Pro Plus at 10 to 12; our catalogue puts the ST-HDSSM at roughly 15. Treat these as our published claims and check them against your own designs at a demo.

Will my setters lose their jobs?

Usually their work changes rather than ends. Someone has to load the machine, sort stones, check set waxes and set the stones a machine cannot: large centre stones, heat-sensitive gems and repairs. Experienced setters are often the best people for those jobs.

Keep reading

Related guides

Automation · 6 min read

What is wax setting in jewellery? How stones are set before casting

Wax setting means setting the stones into the wax model of a piece before it is cast, instead of into finished metal afterwards. When the metal is poured it forms around each stone and locks it in, so the piece comes out of casting already set. It suits designs with many small round stones made in quantity.

Automation · 7 min read

Setting laboratory-grown diamonds at scale: why automatic wax setting pays off

Laboratory-grown diamonds have the same crystal structure as natural diamonds, so an automatic wax setting machine sets them the same way. As their prices fall, designs carry more stones and setting becomes the bottleneck. Cast them in place with a stone-casting investment, a cooler burnout and slow cooling, keep treated colour stones out, and test-cast every new lot first.

Automation · 6 min read

How a double-station wax setting machine works, and when the X4 Pro Plus fits

A double-station wax setting machine sets stones into wax models on one worktable while the operator reloads the other, so the setting head barely waits. The X4 Pro Plus does this with four suction nozzles at ±0.02 mm, rated at up to 15,000 stones per hour on single-phase power. Here is how it works and how to tell whether it suits your workshop.

Want to know more?

Tell us what you need and our team will call or WhatsApp you.

Diamond Wax Setting Machines

What do you need? (optional)

Your details will be used only to respond to your enquiry. Privacy policy

Prefer to share more detail? Use the full enquiry form